Tapioca Ale

Share on Facebook0Tweet about this on TwitterShare on Reddit0
Tapioca Ale (6% abv)
Tapioca is derived from the root of the cassava plant; it is commonly associated with bubble tea and pudding, rather than a root vegetable. And beer is hardly even considered but why not? It’s a starch, and as we know starches can be transformed into sugars which can then be transformed into alcohol. This recipe utilises the brilliant Tapioca flavour.
Write a review
Print
Cook Time
2 hr
Total Time
2 hr
Cook Time
2 hr
Total Time
2 hr
Ingredients:
60-Minute Mash at 67°C
  1. 2.2 L (2¼ qt) of water, with an extra gallon (3.8 L) for sparging
  2. 680g (1.5 lb) English Pale malt
  3. 115g (0.25 lb) Munich malt
  4. 68g (0.15 lb) Tapioca
  5. 68g (0.15 lb) Caramel 40 malt
  6. 22g (0.05 lb) Caramel 15 malt
  7. *All grains should be milled - see this page for information on milling
60-Minute Boil
  1. 12g (0.4 oz) Styrian Golding hops, split into thirds
  2. 5.7g (0.2 oz) Glacier hops
Fermentation
  1. English ale yeast, such as Safale S-04
  2. 63g honey, for bottling
Instructions:
Mash
  1. In a medium-sized stockpot, heat the 2¼ quarts (2.13 liters) of water over high heat to 70°C. Combine with all the malts and tapioca and stir gently. The temperature should decrease to 66°C in around 1 minute. Take the pan off the heat. Steep the grains for 60 minutes between 62°C and 67°C. Every 10 minutes or so, stir and take a temperature reading. If the temperature of the grain becomes too cold, return it to heat and stir until the temperature returns to the specified range and then take it back off the heat. With 10 minutes remaining, in a separate medium-sized stockpot heat 1 gallon (3.8 litres) of water to 77°C. Once the grains have been steeped for 60 minutes, turn the heat to high and stir until the temperature hits 77°C. At this point, take it off the heat.
Sparge
  1. Position a fine-mesh strainer across a stockpot and pour the grains into the strainer, maintain the liquid. Pour the gallon (3.8 litres) of 77°C water over the grains. Recirculate the collected liquid through the grains once.
Boil
  1. Place the pot with the liquid in on the stove and bring to a boil over high heat. Once the liquid starts to foam, lower the heat to a slow rolling boil and add one third of the Styrian Golding hops. After 40 minutes, add the remaining two thirds of Styrian Golding hops, and the Glacier hops after 55 minutes. Prepare an ice bath by stopping the sink and filling it halfway with water and ice. After 60 minutes, take the pot off the heat and place in the ice bath, cooling it to 21°C, this should take about 30 minutes.
Fermentation
  1. Use a funnel and strainer to pour the liquid into your fermenter (remember, it MUST be sanitized). Supplement with water in order to fill the to the 1-gallon mark. Add the yeast using your hands (remember to sanitize those too!) cover the mouth of the jug with one hand, and shake to distribute evenly. Insert the sanitized stopper and tubing to the fermenter and place the other end of the tubing into a bowl of sanitizing solution. As the yeast activates, this solution will bubble as gas is forced through the tube. After 2 to 3 days, once the bubbling has reduced, replace the tubing system with an airlock. Once a further 11 days has passed, bottle your beer using the honey - see this page for bottling instructions.
Notes:
Suggested Food Pairings
  1. Tapioca pudding, panna cotta, cured sausage
For 5 Gallons:
60-Minute Mash at 67°C
  1. 10L (2¾ gallons) water, with an extra 5 gallons (19 L) for sparging
  2. 3.4kg (7.5 pounds) English Pale malt
  3. 570g (1.25 pounds) Munich malt
  4. 340g (0.75 pound) tapioca
  5. 340g (0.75 pound) Caramel 40 malt
  6. 115g (0.25 pound) Caramel 15 malt
60-Minute Boil
  1. 55g (2 ounces) Styrian Golding hops, split into thirds
  2. 30g (1 ounce) Glacier hops
Fermentation
  1. English ale yeast, such as Safale S-04
  2. 340g honey, for bottling
BrewConductor http://brewconductor.com/

Related Posts

Share on Facebook0Tweet about this on TwitterShare on Reddit0

Leave a Reply

Your email address will not be published. Required fields are marked *